Thursday, May 7, 2015

Correctly Burglary Drum Brakes

Once you've replaced the drum brakes on your vehicle, you'll treasure they won't duty husky at great speeds until you rupture them in. The stopping bent is debilitated when you anterior install contemporary drum brakes and you Testament posses to application the brakes a uncommon times to bring them up to the exactly temperature. The ace continuance to rift in, or Bedstead, your just out drum brakes is early Forenoon, when traffic is lustrous.


Instructions


1. Manage your car to an open highway and accelerate to about 60 miles per hour. Do not exceed this speed; going faster could cause the brakes to overheat with repeated braking.


3. Repeat Steps 1 and 2 about 10 times to break in your new drum brakes. After the last cycle, drive on the highway at a cruising speed and avoid applying your brakes as much as possible to allow the brakes to cool down; this takes about five minutes.4.


2. Apply your brakes firmly but not hard enough the trigger the antilock braking system, or ABS. Slow down but do not stop. Decelerate to about 15 miles per hour and then accelerate back up to 60.


Repeat one more break-in cycle after the brakes cool down, following Steps 1 through 3.