The Nissan Titan is a plentiful sixed pickup Motor lorry that sits relatively elevated off the ground, and running boards installed under the doors can assist you bias into the cabin without struggling. These are distinguished for the old, children or anyone who might otherwise admit event getting into the Motor lorry. Unfortunately, provided you hankering to benefit running boards you must drill the holes in the frame yourself, by reason of Nissan did not pre-drill the Titan wrinkle.
Instructions
1. Position the running board under the vehicle, against the lower frame, and purpose the holes in the running board onto the frame using a marker. Lay the running board off to the side.
2. Drill outside the marker dots in the frame using a drill and drill bit. Bring about definite the holes are broad enough to accept the bolts supplied with the running boards.
3.4. Duplicate the process on the other side of the Titan.
Place the running board against the frame and line up the holes. Push the bolts through the holes in the running board and the frame and secure them by threading the nuts onto the bolts. Tighten the bolts and nuts using a socket set.
