Remove the sprint panel of your vehivle. Provided you are unsure of remove your dash and access your stereo go to the Car Stereo Help website (see Resources). This site offers instructions on remove your car's stock stereo for most car models. Wiring harnesses reward diminutive bread and are not burdensome to hook up.
Instructions
1. Life to a van audio specialist and interrogate for a wiring harness that fits the representation of your machine. Not all wiring harnesses are the twin and they are particular to Everyone example.
2.
Upgrading your inventory radio to an aftermarket representation is one of the beyond compare matters that you can determine for the overall sound of your vehicle. One object that is bottom line for installing a modern stereo is a wiring harness. A wiring harness connects the wires of your stereo to the wiring inside of the sprint. Without this it would not be viable to faculty your stereo.3. Unscrew the stock car stereo and save the screws in a container. Take the stereo out of the console.
4. Push down on the white tab of the stock wiring harness that is connected to your radio. Remove your radio from the stock wiring harness.
5. Take your aftermarket wiring harness and match the wires on the one side with the wires of your new stereo. Twist the wires together and wrap with electrical tape to secure the connection. Take the other end and snap it into the other end of the stock wiring harness that was connected to the stock radio.
